Electrical Assembly Safety And Basic Assembly Knowledge

Purchase this product now and earn 1,500 Points!
0 out of 5 based on 0 customer ratings

Introduction

In compliance with the Occupational Safety and Health Administration (OSHA) regulations, this training is required for workers who may use extension cords, electric tools, etc. This training must be provided for personnel (supervisors and workers) involved with these operations.

Working with electricity can be dangerous. Engineers, electricians, and other professionals work with electricity directly, including working on overhead lines, cable harnesses, and circuit assemblies.

Electricity has long been recognized as a serious workplace hazard. OSHA’s electrical standards are designed to protect employees exposed to dangers such as electric shock, electrocution, fires, and explosions. While this training course is very comprehensive, additional site-specific training should be taken for certain hazardous materials that may be encountered at different sites.

Objective

Upon completion of this programme, the participants will be able to:

  • Enhance the safety knowledge for each of the worker on
  • Safety at the workplace
  • Safety on using power tool etc: air screw driver/ multimeter and other tools
  • Enhance their skill on the assembly process
  • Knowing the correct way of wiring and connection
  • Knowing the symbol or diagram of an assembly diagram
  • Trouble shooting on electrical products

Who Should Attend

This program is suitable for Operators and engineers.

Methodology

This stimulating program will maximize the understanding and learning through lecture, discussion, hands on exercises and facilitation.

Module

  • HOW ELECTRICITY WORKS
  • FACTORS OF ELECTRICAL SHOCK
  • HAZARDS OF ELECTRICITY
  • ARC FLASH AWARENESS
  • HOW TO PROTECT YOURSELF FROM ELECTRICITY
  • BASIC ASSEMBLY KNOWLEDGE

RM2,600.00 RM1,500.00

Qty:
Request For In-House
If you purchase this product you will earn 1500 Points!

Fee: RM 1500 per pax


Loyalty Points: 1500 Points


Duration: 2 Days


Note: In-house course is available. Request it HERE

Introduction

In compliance with the Occupational Safety and Health Administration (OSHA) regulations, this training is required for workers who may use extension cords, electric tools, etc. This training must be provided for personnel (supervisors and workers) involved with these operations.

Working with electricity can be dangerous. Engineers, electricians, and other professionals work with electricity directly, including working on overhead lines, cable harnesses, and circuit assemblies.

Electricity has long been recognized as a serious workplace hazard. OSHA’s electrical standards are designed to protect employees exposed to dangers such as electric shock, electrocution, fires, and explosions. While this training course is very comprehensive, additional site-specific training should be taken for certain hazardous materials that may be encountered at different sites.

Objective

Upon completion of this programme, the participants will be able to:

  • Enhance the safety knowledge for each of the worker on
  • Safety at the workplace
  • Safety on using power tool etc: air screw driver/ multimeter and other tools
  • Enhance their skill on the assembly process
  • Knowing the correct way of wiring and connection
  • Knowing the symbol or diagram of an assembly diagram
  • Trouble shooting on electrical products

Who Should Attend

This program is suitable for Operators and engineers.

Methodology

This stimulating program will maximize the understanding and learning through lecture, discussion, hands on exercises and facilitation.

Module

  • HOW ELECTRICITY WORKS
  • FACTORS OF ELECTRICAL SHOCK
  • HAZARDS OF ELECTRICITY
  • ARC FLASH AWARENESS
  • HOW TO PROTECT YOURSELF FROM ELECTRICITY
  • BASIC ASSEMBLY KNOWLEDGE

Reviews

There are no reviews yet.

Be the first to review “Electrical Assembly Safety And Basic Assembly Knowledge”

You're reviewing: Electrical Assembly Safety And Basic Assembly Knowledge . How do you rate this product? *

Prabageran Thiagarayah
Biodata: Prabageran has more than 13 years of working experience with multinational company in Malaysia. He started his career in 2001 and has held various positions as production engineer, process engineer, manufacturing engineer, senior manufacturing engineer, assistant manufacturing engineering manager and as a performance lean manager with a German-based company in the aluminum industry. Currently, he is the Head of Process Improvement at Port of Tanjung Pelepas, APM Terminals. He holds a Bachelor of Mechanical Engineering (Hons) from University Tenaga National Malaysia and Master's in Management from Open University Malaysia (OUM). Currently he is pursuing his PhD in Engineering majoring in Lean Manufacturing and 6 Sigma. Besides that, he also has a Master Black Belt in Lean Six Sigma from Norsk Hydro Aluminium and a Green Belt in Six Sigma from Motorola University. He is a certified Pembangunan Sumber Manusia Berhad (PSMB) trainer. He has experience in lecturing with Olympia College in Johor and conducting training programs for several multinational organizations and training providers.

Redemption Products

Pin It on Pinterest