Engineering and Technical

Sort by:
Default
Show:
12 Products per page
Grid View List View
35%OFF
7 Steps Approach To Reduction Of Unplanned Breakdown
Quick View Add to cart
Quick View
7 Steps Approach To Reduction Of Unplanned Breakdown

RM1,300.00 RM850.00

Add to cart
7 Steps Approach To Reduction Of Unplanned Breakdown ,
 7-Steps-Approach-To-Reduction-Of-Unplanned-Breakdown-HRDF-TrainingsEnhancing-Your-Presentation-Skills-hrdf-trainings

Introduction

Equipment breakdowns are usually very expensive to fix and also result in substantial opportunity costs due to equipment/ facility downtime. A proactive planned maintenance program can be very effective in reducing such unplanned breakdowns. Moreover it will also ensure a larger life cycle of your machines. So the gain is in reducing costs as well as increase in productivity.

Many deferent kinds of related problems can arise with the equipment, machines, and installations on the factory floor:

Unplanned minor stoppages (3 minutes or less) that disrupt production.

Unplanned medium stoppages (4 to 30 minutes) and Major stoppages (more than 30 minutes) that halt production.

Waste from stoppages for Pre-setup, parts replacement, or maladjustments during setup and changeover

Stoppages to replace tooling

Waste from rework, defects, or poor yield

Waste from machines and equipment standing idle due to shortage of parts

Waste from lines disrupted by employee absences.

These 7 types of wastes are all important, but from the view point of maintenance, the most important kind of waste is defects due to equipment problems. This training is about finding ways to eliminate these wastes quickly and reduce the unplanned breakdown

 How Will You Benefit

  • Developing techniques of Current Condition Study
  • Line Problem Summary
  • Analyzing Minor Stoppages Mechanisms and Their Causes
  • Forming Clear Picture of Phenomenon, Mechanisms, and Causes
  • Setting up an Instant Maintenance System
  • Providing Support for Autonomous Maintenance Activities
  • Creating Instant Maintenance Manuals and Demonstration Techniques to Achieve Three Minutes or Less (world-class standard) Recovery Time of Equipment Stoppages

Who Should Attend

This course is suitable for all personnel that are responsible to solve operational issues and response to (internal & external) customer complaints,

  • Maintenance Manager, Engineers and Senior Technicians
  • Engineering Managers, Engineers and Executives.
  • Industrial/Process Managers and Engineers
  • R & D Managers, Engineers and Executives
  • Any Non-technical Personal who because of the nature of work, are involved or are interested to more about modern equipment maintenance.

Methodology

For each of the topic covered, the participants are introduced with fundamental concepts and immediately follow-up with related learning activity to facilitate learning. In such, participants are required to perform the tasks through group activity discussion and analysis in a work-relate simulated situation to demonstrate the learning topic outcome.

Module

  • INTRODUCTION TO EQUIPMENT WASTES AND INSTANT MAINTENANCE
  • STUDY CURRENT CONDITIONS
  • SUMMARIZE THE PROBLEMS WITH EACH LINE AND MACHINE
  • ANALYZE MINOR STOPPAGES MECHANISMS & THEIR CAUSES
  • FORM A CLEAR PICTURE OF THE PHENOMENON MECHANISMS, AND CAUSES
  • SET UP AN INSTANT MAINTENANCE SYSTEM 1
  • PROVIDE SUPPORT FOR AUTONO0MOUS MAINTENANCE
  • CREATE INSTANT MAINTENANCE MANUALS AND DEVELOP DEMONSTRATION TECHNIQUES
Learn More

RM1,300.00 RM850.00

  • Availability: in stock
42%OFF
Placeholder
Quick View Add to cart
Quick View
AutoCAD 3D Modelling

RM2,600.00 RM1,500.00

Add to cart
AutoCAD 3D Modelling ,

Objective

Upon completion of this program, participants will be able to:

  • Provide necessary skills and knowledge on how to use the AUTOCAD, features such as how to create 3D models, primitives, Boolean operations and rendering

Who Should Attend

Anyone who wishes to create his/ her drawings using AUTOCAD. Targeted for personnel in manufacturing, engineering or designing industry

Methodology

This course will be conducted through interactive lectures, PowerPoint presentation, video presentation, role-lay, and group discussions

Module

  • CREATING 3D OBJECTS
    • Viewport Setup
    • Multiple Viewports
    • Understanding 3D Objects
    • Creating 3D Objects
    • Viewing 3D Objects
    • 3D ORBIT
    • DVIEW
    • Shading 3D Objects
    • Coordinate Systems
    • Defining UCS
  • EDITING 3D OBJECTS
    • Aligning Objects
    • Rotating 3D Objects
    • Mirroring 3D Objects
    • Creating 3D Array
  • INTRODUCTION TO SOLID MODELING
    • Creating Solids from Existing 2D Objects – EXTRUDE
    • Creating Extrude using Taper Angle
    • Creating Extrude using Path
    • Creating Solids by Means of Revolution
    • Region and Boundary
  • INTRODUCTION TO SOLID EDITING
    • Creating Composite Solids ( Union, Subtraction and Intersection )
    • Solid Editing using Extrude Faces
    • Solid Editing using Shell
    • Solid Editing using Color Faces
    • Fillet or Chamfer Faces
    • Moving and Coping in 3D
    • Slice and Section 3D
  • PLOTTING ENHANCEMENTS
    • Plotting in AutoCAD – Shaded View
    • Layouts – Multiple Paperspaces
Learn More

RM2,600.00 RM1,500.00

  • Availability: in stock
38%OFF
Placeholder
Quick View Add to cart
Quick View
Autonomous Maintenance For Manufacturing Operations

RM1,300.00 RM800.00

Add to cart
Autonomous Maintenance For Manufacturing Operations ,

Introduction

Maintenance is generally done by Equipment Technicians and Engineers, who mostly focus on the OEE (Overall Equipment Efficiency) of the machines. Many organizations fail to realize that an Operator can contribute or help on the improvement of the machine OEE. The reason being that these operators who can detect or observe the abnormalities (such as noise, vibrations, temperature, odour, etc) of the machine operation at an early stage.Whereby if these abnormalities is corrected at its early stage will prevents the deterioration of the machine thus reducing the COST and improving PRODUCTIVITY.If an operator were to be trained to detect the abnormalities and do minor repairs which will greatly help in improving OEE.

The program provides manufacturing personnel with the necessary Knowledge, Techniques and Skill competency in today’s complex, challenging and rapidly changing global economy

Objective

Upon completion of this programme, the participants will be able to :

  • Develop machine operators as the first line of defence against ‘Equipment Deterioration’ through Cleaning, Inspection and Lubrication hence detecting the abnormalities and taking counter measures at an early stage.
  • Skill up the operator for basic technical know how and to enhance a mindset change.
  • Enhance & Energize the team synergy in the practices aimed at maximizing the machine effectiveness.

Who Should Attend

This program is suitable for Machine Operators, Technicians and Production Supervisors
Level for Managers and above

Methodology

This is a highly interactive training program, whereby participants are to gain the learning points through workshop activities and analysis techniques.

Module

  • UNDERSTANDING OPERATORS ROLE IN PRODUCTIVITY IMPROVEMENT
  • UNDERSTANDING THE MACHINES OPERATIONS AND TYPES OF LOSSES
  • UNDERSTANDING THE SAFETY ASPECT OF MACHINES
  • UNDERSTANDING OF BASIC TOOLS NEEDED TO DO MINOR REPAIRS
  • UNDERSTANDING THAT CLEANING (MACHINE) IS INSPECTION
  • UNDERSTANDING WHAT IS ABNORMALITIES :IE FORCED DETERIORATION, ABNORMAL SOUND,HEAT, VIBRATION, SMELL
Learn More

RM1,300.00 RM800.00

  • Availability: in stock
42%OFF
Placeholder
Quick View Add to cart
Quick View
Best Practices In Industrial Hydraulic Troubleshooting Technology

RM2,600.00 RM1,500.00

Add to cart
Best Practices In Industrial Hydraulic Troubleshooting Technology ,

Introduction

Facing similar problems?

  • No system pressure, where do you look?
  • Can you replace a pressure compensated pump with a gear pump?
  • What is an acceptable level of vacuum at the inlet of a pump?
  • Do you know what work needs to be done but can’t quite figure out the hydraulic application to do it?
  • Do you have new problems pop up or old, chronic problems that never go away?

Then this program is for you. So much more than the typical theory and information course, this program offers real world solutions to your real world hydraulic problems. In the course, you’ll learn to focus on the troubleshooting process and the inspection and testing tasks that are part of a systematic approach to locating malfunctions and their underlying causes.

Objective

Upon completion of this programme, the participants will be able to :

  • Create and match a variety of hydraulic applications to the work to be performed
  • Properly test and inspect hydraulic systems
  • Diagnose system versus component problems
  • Distinguish problem “symptoms” from the actual “cause”
  • Apply a common-sense, systematic approach to Troubleshooting
  • Evaluate the cause and effect of changing or re-sizing system components
  • Recommend and implement change towards fixing problems

Who Should Attend

This program is targeted for Engineers, Supervisors, Technicians, Team / Line Leaders, Manager and all those involved in the design, operation and maintenance of the Hydraulic Systems

Methodology

This stimulating program will maximizes the understanding and learning through lecture, discussion, case studies and practical activities

Module

  • INTRODUCTION TO HYDRAULIC TROUBLE SHOOTING
  • BASIC TROUBLESHOOTING REQUIREMENTS
  • UNDERSTANDING THE LEAKAGE PROBLEMS WHICH IS COMMON IN ANY APPLICATION
  • IDENTIFY POSSIBLE CAUSES OF NOISY PUMPS AND CAVITATION
  • IDENTIFY THE DO’S AND DON’TS DURING HYDRAULIC TROUBLE SHOOTING AND MAINTENANCE
  • IDENTIFY POSSIBLE CAUSES OF NO SYSTEM PRESSURE, LOW SYSTEM PRESSURE
  • IDENTIFY AND LINK TEMPERATURE PROBLEM TO SYSTEM RUNNING HOT
  • COMMON CYLINDER PROBLEMS, SOLENOID FAILURES AND CREATING OIL MAINTENANCE PROGRAM
Learn More

RM2,600.00 RM1,500.00

  • Availability: in stock
44%OFF
Placeholder
Quick View Add to cart
Quick View
CCP154 Logix5000™ Controllers – RSlogix™ 5000 Level 4: Structured Text/Sequential Function...

RM2,600.00 RM1,450.00

Add to cart
CCP154 Logix5000™ Controllers – RSlogix™ 5000 Level 4: Structured Text/Sequential Function Chart Programming ,
 Enhancing-Your-Presentation-Skills-hrdf-trainings

Introduction

During this course, students will be able to practice programming structured text and sequential function chart routines in an RSLogix 5000 project to meet the requirements of a given specification.

Building on students’ project development skills, such as creating tags and configuring I/O, this course provides the skills and knowledge to program using the structured text and sequential function chart programming languages.

Students will learn how to select instructions, select expressions, select constructs and then enter these elements and more into a routine. Students will also learn how to test sequential function chart logic using forces and step through.

The instructor will demonstrate the relevant procedures required to program with structured text and sequential function charts. Students will be provided ample opportunities to create and test their own projects using a real workstation.

 How Will You Benefit

Upon completion of this programme, the participants will be able to:

  • To practice programming structured text and sequential function chart routines in an RSLogix 5000 project to meet the requirements of a given specification
  • Understanding the skills and knowledge to program using the structured text and sequential function chart programming languages
  • Learn how to select instructions, select expressions, select constructs and then enter these elements and more into a routine
  • Learn how to test sequential function chart logic using forces and step through.

Pre-requisites

  • To successfully complete this course, the following prerequisites are required:
  • Ability to perform basic Microsoft® Windows® tasks
  • Completion of the RSLogix 5000 Level3: Project Development course (Course No. CCP143)
  • Completion of the RSTrainer for RSLogix 5000 Software computer-based training course
  • Experience with basic RSLogix 5000 projects (navigating the software, creating tags, creating routines, etc.)

Next Learning Level

  • After mastering the skills covered in this course, students may be interested in attending other specialized courses, such as:
  • RSLogix 5000 Level 4: Function Block Programming (Course No. CCP152)
  • RSLogix 5000 Level 4: Motion Programming Using Ladder Logic (Course No. CCN142)

Who Should Attend

Individuals who need to program structured text and sequential function chart routines in RSLogix 5000 projects for any Logix5000 controller should attend this course.

Methodology

This stimulating program will maximizes the understanding and learning through lecture, discussion, case studies and hands-on practice

Logix5000 Documentation Reference Guide will be provided as part of the course package.

Module

  • IDENTIFYING AVAILABLE LANGUAGES IN RSLOGIX 5000 SOFTWARE
  • INTRODUCTION TO STRUCTURED TEXT
  • STRUCTURED TEXT USING IF, THEN, ELSE CONSTRUCT:
  • STRUCTURED TEXT USING CASE CONSTRUCT
  • STRUCTURED TEXT USING WHILE, DO CONSTRUCT
  • STRUCTURED TEXT USING FOR, DO CONSTRUCT
  • SEQUENTIAL FUNCTION CHART WITH “NON-STORED” ACTION QUALIFIERS
  • SFC_STOP STRUCTURE
  • SEQUENTIAL FUNCTION CHART WITH “NON-STORED” AND “P0” ACTIONS
  • SEQUENTIAL FUNCTION CHART WITH “TIME LIMITED” ACTION QUALIFIERS
  • SEQUENTIAL FUNCTION CHART WITH “STORED” / “RESET” ACTION QUALIFIER
  • INTEGRATED PRACTICE: SEQUENTIAL FUNCTION CHART FINAL PROJECT WITH RSVIEW™32™ SOFTWARE
  • SFR, SFP, AND EOT
  • CREATING THE PREPARE PACKAGING SFC ROUTINE
  • CREATING THE PACKAGE IT STRUCTURED TEXT ROUTINE
  • EXAMINING THE LOGIC
  • TESTING THE LOGIC USING FORCE(S) AND STEP THROUGH(S)
Learn More

RM2,600.00 RM1,450.00

  • Availability: in stock
46%OFF
Effective Preventive Maintenance
Quick View Add to cart
Quick View
Effective Preventive Maintenance

RM2,600.00 RM1,400.00

Add to cart
Effective Preventive Maintenance ,
 Effective-Preventive-Maintenance-HRDF-TrainingsEnhancing-Your-Presentation-Skills-hrdf-trainings

Introduction

Preventive Maintenance (PM) is a program of routine equipment inspections, equipment monitoring and predicting, maintenance tasks and repairs which are scheduled to ensure that the degradation of equipment is minimized. The overall objective is to prevent operating problems or failures and ensure reliable operation of facilities. Effective Preventive Maintenance addresses people, their equipment and the work processes they use; is an equipment management approach that focuses the total organization on improving equipment reliability and performance.

 How Will You Benefit

Upon completion of this programme, the participants will be able to :

  • Learn how to design daily, weekly, monthly PM program for a zero unplanned plant shutdown.
  • Design a responsive reporting system that will meet your changing needs.
  • Obtaining comprehensive effective PM methodology.
  • Increase maintenance efficiency and achieve optimum use of existing labor, parts and equipment.

Who Should Attend

This program is suitable for Maintenance/ Engineering Department, Engineers, Executives, Technicians, Maintenance Supervisors, Team Leaders

Methodology

The course incorporates lecture, examples and group discussion

Module

  • PREVENTIVE MAINTENANCE OVERVIEW
  • PRODUCTIVE MAINTENANCE CONCEPT
  • MAINTENANCE SKILL TRAINING
  • PLANNING FOR PERIODIC MAINTENANCE
  • BUILDING AN INFORMATION MANAGEMENT SYSTEM
  • LUBRICATION CONTROL
  • SPARE PARTS MANAGEMENT SYSTEM
  • BUILDING PREDICTIVE MAINTENANCE
  • MAINTENANCE BUDGET CONTROL AND COST REDUCTION
  • EVALUATE THE PM SYSTEM
Learn More

RM2,600.00 RM1,400.00

  • Availability: in stock
52%OFF
Effective Spare Part Management
Quick View Add to cart
Quick View
Effective Spare Part Management

RM2,600.00 RM1,250.00

Add to cart
Effective Spare Part Management ,
 Effective-Spare-Part-Management-HRDF-TrainingsEnhancing-Your-Presentation-Skills-hrdf-trainings

Introduction

The management of spare parts and other materials needed for realization of the maintenance process is one of the key functions in physical asset management. Especially, for example, in the military and large public property ownership, power generation, chemical, motor and petrochemical industries, spare parts inventories can soon add up to tens of thousands of various items in a value of hundreds of millions RM. It is obvious that efficient spare parts inventory management can bring significant economies in operational costs. This workshop describes with examples how those economies can be made.

 How Will You Benefit

Upon completion of this programme, the participants will be able to :

  • Describe the savings that can be made from implementing an effective and economic spare parts stores system using both manual and computer systems.
  • Show the techniques which can be used in order to identify, control and coordinate the spare parts requirements on a daily and long-term basis.
  • Discuss the requirements for making economical choices for which special strategic/critical spares should be held, and options for how they may be managed
  • Understand the latest technique and methods in managing inventory to reduce and eliminate inventory obsolesces.

Who Should Attend

This program is suitable for Managers, Executives, Officers, Team/Line Leaders and Supervisors.

Methodology

This is a highly interactive training programme, whereby participants are to gain the learning points through experiential activities.

Module

  • WHY ARE SPARE PARTS SO SPECIAL
  • THE THREE STAGES OF SPARE PARTS MANAGEMENT
  • GO FOR PREVENTIVE MAINTENANCE.
  • ELIMINATE PROCESS PROBLEMS
  • SEGMENT YOUR SPARE PARTS PORTFOLIO
  • EVALUATE SPARE PARTS CRITICALLY
  • SPARE PARTS MANAGEMENT STARTS WITH GOOD FORECASTING
  • USE SPECIAL METHODS FOR INTERMITTENT DEMAND ITEMS
  • CONSIDER THE WHOLE LIFE CYCLE OF YOUR EQUIPMENT
  • IMPLEMENT A GOOD INFORMATION SYSTEM FOR SPARE PARTS AND MAINTENANCE INVENTORY MANAGEMENT
Learn More

RM2,600.00 RM1,250.00

  • Availability: in stock
42%OFF
Placeholder
Quick View Add to cart
Quick View
Electrical Assembly Safety And Basic Assembly Knowledge

RM2,600.00 RM1,500.00

Add to cart
Electrical Assembly Safety And Basic Assembly Knowledge ,

Introduction

In compliance with the Occupational Safety and Health Administration (OSHA) regulations, this training is required for workers who may use extension cords, electric tools, etc. This training must be provided for personnel (supervisors and workers) involved with these operations.

Working with electricity can be dangerous. Engineers, electricians, and other professionals work with electricity directly, including working on overhead lines, cable harnesses, and circuit assemblies.

Electricity has long been recognized as a serious workplace hazard. OSHA’s electrical standards are designed to protect employees exposed to dangers such as electric shock, electrocution, fires, and explosions. While this training course is very comprehensive, additional site-specific training should be taken for certain hazardous materials that may be encountered at different sites.

Objective

Upon completion of this programme, the participants will be able to:

  • Enhance the safety knowledge for each of the worker on
  • Safety at the workplace
  • Safety on using power tool etc: air screw driver/ multimeter and other tools
  • Enhance their skill on the assembly process
  • Knowing the correct way of wiring and connection
  • Knowing the symbol or diagram of an assembly diagram
  • Trouble shooting on electrical products

Who Should Attend

This program is suitable for Operators and engineers.

Methodology

This stimulating program will maximize the understanding and learning through lecture, discussion, hands on exercises and facilitation.

Module

  • HOW ELECTRICITY WORKS
  • FACTORS OF ELECTRICAL SHOCK
  • HAZARDS OF ELECTRICITY
  • ARC FLASH AWARENESS
  • HOW TO PROTECT YOURSELF FROM ELECTRICITY
  • BASIC ASSEMBLY KNOWLEDGE
Learn More

RM2,600.00 RM1,500.00

  • Availability: in stock
46%OFF
Electrical Engineering For Non-Electrical Engineers
Quick View Add to cart
Quick View
Electrical Engineering For Non-Electrical Engineers

RM2,600.00 RM1,400.00

Add to cart
Electrical Engineering For Non-Electrical Engineers ,
 Electrical-Engineering-For-Non-Electrical-Engineers-HRDF-TrainingsEnhancing-Your-Presentation-Skills-hrdf-trainings

Introduction

Focus on Basic Concepts

This course focuses on the basic principles of industrial and commercial electrical power distribution design. Your trainer will first help you understand basic concepts for the direct current case and then extend them to single-phase and three-phase alternating current.

They will also develop basic electrical concepts such as Voltage, Current, and Resistance Emphasis will be on understanding the basic phenomena rather than the rigorous mathematical derivations. Instruction will assume that you have no prior electrical engineering formal education but are currently working in the field.

Understand Electrical Principles

Electrical Energy is used everywhere and affects every technical careers. This course will introduce some of the basics of electrical engineering theories & concepts.

By participating in this course, you’ll gain a general understanding of the general concepts of electrical energy generation, transmission and distribution besides knowledge in the operating principles of relevant devices/equipments.

 How Will You Benefit

Upon completion of this programme, the participants will be able to :

  • Basic electrical concepts & definitions
  • Utility generation, transmission and distribution
  • System design philosophy
  • Design procedures
  • Electrical construction materials
  • Grounding and power quality concepts
  • Electric Machines

Who Should Attend

This program is suitable for Engineer & Technician

Level 1 and above

Methodology

This stimulating program will maximizes the understanding and learning through discussion and Q & A session.

Module

  • PRINCIPLES OF ELECTRICITY, AC AND DC
  • ELECTRICAL CODE AND SAFETY
  • ELECTRICAL EQUIPMENT AND INSTRUMENTATION IN INDUSTRIAL APPLICATIONS
  • ELECTRICAL CONTROL SYSTEMS
  • UNDERSTANDING ELECTRICAL DRAWINGS AND DOCUMENTATION
Learn More

RM2,600.00 RM1,400.00

  • Availability: in stock
42%OFF
Placeholder
Quick View Add to cart
Quick View
Electrostatic Discharge Control

RM2,600.00 RM1,500.00

Add to cart
Electrostatic Discharge Control ,

Introduction

In order to maintain the quality in your products, ESD awareness is essential for everyone in the organization. This program covers the basic concepts of ESD, proper precautionary measures required to avoid electronic damage to sensitive electronic components, proper handling techniques and use of personal grounding devices, how to control ESD by working in ESD protected workstation and ESD protected work areas.

Objective

Upon completion of this programme, the participants will be able to :

  • Describe how static electricity is generated from common actions
  • Describe what static electricity is, how it is produced and how its uncontrolled discharge can damage components and equipments
  • Describe conditions most likely to cause uncontrolled electrostatic discharge

Who Should Attend

This program is suitable for Technicians, Line Leaders, Supervisors and Engineers

Methodology

This stimulating program will maximizes the understanding and learning through lecture, discussion, case studies and practical activities

Module

  • INTRODUCTION TO ESD
  • THE ABC OF ESD, DEFINITION
  • WHAT IS ESD?
  • THE TYPES OF ESD FAILURES
  • ESD STANDARD & TEST
  • STANDARD – HBM / MM
  • IDENTIFYING ESD PROTECTED AREA
  • PRECAUTIONS AND STEPS TAKEN TO AVOID ESD
  • ESD CONTROL
  • ESD SIMULATION EQUIPMENTS : ESD MODULES
  • EOS
  • DEFINTION
  • IMPACT
Learn More

RM2,600.00 RM1,500.00

  • Availability: in stock
46%OFF
Energy Management
Quick View Add to cart
Quick View
Energy Management

RM2,600.00 RM1,400.00

Add to cart
Energy Management ,
 Energy-Management-HRDF-TrainingsEnhancing-Your-Presentation-Skills-hrdf-trainings

Introduction

There are increasing number of businesses where energy management is included as part of management strategies to improve bottom line results. Evidence shows that energy management has direct commercial benefits. Energy audits suggest that most businesses can save between 5 ~ 25% on energy costs annually.

In other words, improvement in the way an organization uses energy can reduce operating costs and improve profitability, thus providing a competitive edge for business continuity

Benefits:

  • Reduced Electricity Bill
  • Reduced Maintenance Cost
  • Improved Bottom Lines: Profit & Operating Costs
  • Improved Organizational Learning & “Know-How”
  • Improved Staff Awareness through HANDS ON approach
  • Reduced Energy Loss
  • Reduced CO2 emissions
  • Additional earnings via Carbon Credit ( If applicable )

 How Will You Benefit

Upon completion of this programme, the participants will be able to :

  • To form an energy team in order to take collective responsibility for obtaining optimum energy use
  • To enable energy team to understand and attain knowledge on Energy Management
  • Gain insight of energy use, cost, technologies and how to improve profits by reducing energy cost
  • Make energy conservation as part of daily life

Who Should Attend

This program is suitable for Mainly Maintenance and Facility Personnel from Finance and Admin Department

Level for Executives and above

Methodology

This stimulating program will maximizes the understanding and learning through lecture, discussion, case studies and practical activities.

Module

  • BASIC ELECTRICAL THEORY RELATED TO ENERGY MANAGEMENT
  • UNDERSTANDING AND MINIMIZING YOUR ELECTRICITY BILLS
  • ENERGY AUDIT MEASUREMENT
  • FUNDAMENTAL OF ENERGY AUDIT TECHNIQUE
  • AIR CONDITIONING SYSTEM
  • MOTORS & VARIABLE SPEED DRIVES
  • COMPRESSED AIR SYSTEM
  • LIGHTING – ENERGY SAVING OPPORTUNITIES
  • EXPLORE ALTERNATIVE ENERGY
Learn More

RM2,600.00 RM1,400.00

  • Availability: in stock
52%OFF
Hydraulics and Pneumatics Practices In Industries
Quick View Add to cart
Quick View
Hydraulics and Pneumatics Practices In Industries

RM2,600.00 RM1,250.00

Add to cart
Hydraulics and Pneumatics Practices In Industries ,
 Hydraulics-and-Pneumatics-Practices-In-Industries-HRDF-Trainings

How Will You Benefit

After attending this course you will…..

  • Be able to select suitable components in both hydraulic and pneumatic systems.
  • Understand the fundamentals of how to build line diagrams with these components.
  • Acquire tips on installation procedures.
  • be able to trouble-shoot problems faced in these systems
  • Have up-to-date information on the principles, operation, application and maintenance practices of hydraulic and pneumatic systems.

Who Should Attend

  • Build Maintenance Managers, Superintendents, Supervisors and Technicians, Plant Managers, Service Engineers, Supervisors and Technicians who are dealing with the integration of hydraulic and pneumatic systems in their plant.
  • Technical Personnel without engineering and technological background but want to familiar themselves with selection and maintenance practices in both hydraulics and pneumatics systems.

Methodology

A combination of interactive lectures to explain the fundamental principles of hydraulics and pneumatics, for selecting and maintenance works carried out on different types of industrial hydraulic and pneumatic systems for a variety of applications.

Module

  • INTRODUCTION
  • HYDRAULIC SYSTEM
  • PNEUMATICS SYSTEM
  • HYDRAULIC AND PNEUMATIC SYSTEM
Learn More

RM2,600.00 RM1,250.00

  • Availability: in stock

Showing 1–12 of 41 results